Amped Wireless AP300 Guia do Utilizador Página 39
- Página / 49
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
AP300
USER’S GUIDE
38
I do not have Internet access when connecting to the Smart Access Point
a. Your router or original network may not have Internet access. First check to see if you are able to
access the Internet by connecting directly with your router. If you cannot, there is a problem with
your router that needs to be fixed first. If you are able to access the internet, continue with the
following troubleshooting options below.
b. Your router may be using Static IP assignments. If so, you will need to configure a Static IP for the
Smart Access Point. Connect your PC to the Smart Access Point using an Ethernet cable. Disconnect
your PC from any wireless networks that it may be connected to. Access the web menu at
setup.ampedwireless.com using a web browser. Access the IP settings menu from the left hand
navigation bar. Select ‘Disable’ under the DHCP dropdown menu and enter an IP address that
matches your router’s IP settings.
c. Detach the Smart Access Point from your router and reset it back to default settings by holding down
the reset button (red circle) on the back panel of the Smart Access Point for 5-10 seconds. After it has
reset, reattach it to your router’s network port. Allow up to 2 minutes for the Smart Access Point to
reconfigure itself to your network and attempt to access the Internet through the Smart Access
Point’s wired or wireless network.
Celluon Klawiatury urządzeń mobilnych podręczniki użytkownika
Zaczynanie od M
Comentários a estes Manuais